F299201 Blower Fan Kit For Mr Heater

• ➤ 【Compatibility】: F299201 Blower Fan Kit for Mr. Heater 20,000 BTU - 30,000 BTU Vent-Free Well Heater(2016 to Present). Fits NTE Item#s 52563, 52564, 52569, 52570, 52558, 52559, 52561, 52562, 255839 and 255639. The Mr. Heater Vent-Free Blower Kit can be installed on 20,000 and 30,000 BTU model Blue Flame and Radiant, Propane and Natural Gas Vent-Free heaters(2016 to current).
• ➤【The F299201 Vent Free Blower Fan Kit Specifications】: Size: 5 3/8'' x 5 3/16'' x 6 1/8'', Spacing of Screw Holes: 4 7/8'' x 5 1/2'', Power Cord Length: 54", Wattage: (W)18, Volts: 120V, Amperage: 0.02. Easy to install and delivers 18.5 CFM with a standard 3-prong 120-Volt plug. Can be used on wall heaters that are wall mounted or floor mounted. Please Note: Please be sure to compare the dimensions listed with your original, to ensure proper fitment.
• ➤【AUTO/OFF/Manual Operation Mode】 Installed switch installed on the heater blower is a three-position switch. Set the switch to 'MAN' for manual mode, allowing the fan to continuously run until the switch is returned to the OFF 'O' position'; Set the switch to 'AUTO' for the automatic mode, which will automatically cycle the blower on as the heater heats up and then off when the unit has cooled.
• ➤【Move More Air】: This F299201 blower promotes hot air circulation by moving or pushing a large volume of air, ensuring that the heat generated by your fireplace is evenly distributed throughout the room. It breaks the limitations of traditional fireplaces that only allow for localised heating, allowing your entire room to enjoy the warmth and create a comfortable indoor environment.
• ➤【Easy to Install】: The F299201 heater fan is complete assembly, includes power cord, built in thermostat, mounting screws. Only a screwdriver needed, expert installation not required. Mr. Heater blower fan achieves excellent heating effects by improving thermal cycle efficiency, the installation is simple and the effect is significant.

F299201 Blower Fan Kit for Mr. Heater 20,000-30,000 BTU Vent-Free Heaters (2016 to Present), F299201 Vent-Free Blower Fan Accessory Kit Replacement Parts.

Specifications

Dimensions of Fan: 5 3/8'' x 5 3/16'' x 6 1/8''

The spacing of screw holes: 4 7/8'' x 5 1/2''

Volts: 120V

Airflow in C.F.M: 18.5

Power Consumption: 18W

Compatibility:

Fits for Mr. Heater 20,000-30,000 BTU Vent-Free Heaters space heater from 2016 to current models.

Fits NTE Item#s 52563, 52564, 52569, 52570, 52558, 52559, 52561, 52562, 255839 and 255639.

【Advantage & Benefit】

High Quality Blower Fan

UL Certified

Powerful, Quiet, Energy Efficient and Long Lasting.

Note: Please double check the size of your original parts, and compare with ours to ensure proper fitment before ordering.